HAMMER STRENGTH – MTS Iso-Lateral Incline Press
$8,658.00
Hammer Strength MTS Iso-Lateral Incline Press: selectorized incline press with separate weight stacks (2 x 150 lb) and independent arm motion. Best for: gyms and studios that want a chest and shoulder press with independent arms and an easy entry and exit.
SATISFACTION GUARANTEE
FREE SHIPPING
RETURNS
PROTECTION PLAN
Request A Quote
Product Description
MTS Iso-Lateral Incline Press
The Hammer Strength MTS Iso-Lateral Incline Press is a selectorized pressing machine built from human movement. Two separate weight stacks drive independent diverging and converging presses, and an overhead pivot follows a natural arc of shoulder motion. It measures 40 x 68 x 77 in and carries two 150 lb stacks.
Best for: gyms and studios that want a chest and shoulder press with independent arms and an easy entry and exit.
Key features
- Separate weight stacks for equal strength development on both sides.
- Independent diverging and converging pressing motions for variety.
- Overhead pivot that follows a natural arc of shoulder motion.
- Angled seat back for easy entry and exit.
- Full front and back shrouds and pulley covers.
What the incline press works
An incline press is a standard pressing exercise for the chest, shoulders and arms. Hammer Strength says the separate stacks give equal strength development and muscle stimulation variety. Each arm presses its own stack, which means the stronger arm cannot take over the work during a set.
Build and construction
The frame is 11-gauge steel with an electrostatic powder coat finish for adhesion and durability. The weight stacks use solid-steel plates, a top plate fitted with self-lubricating bushings, and a 7/16 in weight selector pin that locks magnetically and stays attached to the stack. Belts and pulleys are heavy duty, the pads are molded with a radiused edge, full front and back shrouds cover the stack and pulleys, and the foot platforms are polyethylene spray-coated. Grips are an extruded thermo rubber compound held by aluminum collars. Placards on the machine show proper use and the muscles trained.
Specifications
- Dimensions (L x W x H): 40 x 68 x 77 in
- Recommended live area: 64 x 80 in
- Machine weight: 765 lb
- Weight stacks: 2 x 150 lb
- Max user weight: 300 lb
- Frame: 11-gauge steel, powder coated
How it compares in the MTS line
- Choose the Incline Press if you want an incline pressing angle. The MTS Iso-Lateral Shoulder Press is 45 x 62 x 54 in and 746 lb with a 69 x 74 in live area, against 40 x 68 x 77 in and 765 lb for the Incline Press.
- Choose the Incline Press if you want a pressing station to balance a pulling station. The MTS Iso-Lateral High Row is 51 x 62 x 82 in and 765 lb with a 75 x 74 in live area.
Frequently asked questions
How much space does it need?
It measures 40 x 68 x 77 in and Hammer Strength recommends a 64 x 80 in live area.
Does it need power?
No outlet needed. The resistance comes from the weight stacks, so there is nothing to plug in.
How much weight does it hold or load?
It carries 2 x 150 lb weight stacks, and the maximum user weight is 300 lb.
Who delivers and installs it?
Our own team delivers, assembles and installs it, then you are ready to train.
What warranty does it have?
Hammer Strength lists a 10-year frame warranty on this machine, 5 years on bearings and on the block, pulleys, plates and rods, 1 year on belts and grips, and 3 months on labor, upholstery, springs and hardware.
Why buy from First Place Fitness Equipment
First Place Fitness Equipment has sold commercial and home strength equipment since 2008. If you are building a press, row and pulldown lineup, our team can match stations to the floor space you have. Our team handles delivery and installation, and we back it with service after the sale. We also price match. Serving all of Florida and Georgia.
Additional information
| Brand | Hammer Strength |
|---|---|
| Series / Line | MTS Iso-Lateral |
| Type | Selectorized incline press |
| Max User Weight | 300 lb |
| Frame | 11-gauge steel with electrostatic powder coat finish |
| Weight Plates | Solid steel plates; magnetic weight selector pin, 7/16 in diameter, attached to the stack |
| Belts and Pulleys | Heavy-duty belt system |
| Cushioning | Pads molded with a radius edge |
| Shrouds | Full front and back shrouds and pulley covers |
| Foot Platforms | Polyethylene spray-coated |
| Hand Grips | Extruded thermo rubber compound, retained with aluminum collars |
| Instructional Placards | Included, showing proper use and muscles trained |
| Dimensions (L x W x H) | 40 x 68 x 77 in |
| Recommended Live Area | 64 x 80 in |
| Machine Weight | 765 lb |
| Weight Stacks | 2 x 150 lb |
| Warranty | Frame 10 years; bearings 5 years; block, pulleys, plates and rods 5 years; belts and grips 1 year; labor, upholstery, springs, hardware 3 months |





